Quantcast
Channel: Automotive Repair Manual Download and Reviews » Search Results » pontiac frontend steering
Viewing all articles
Browse latest Browse all 15

Car’s Power Steering Belt Installation Instructions

0
0

A car’s power steering system is centralized on the energy steering pump, which operates to offer the system with fluid. The facility produced by the engine is transferred to the facility steering pump with a belt. This belt turns a pulley on the front of the pump. Ought to the belt break, the power steering pump will fail to function and the power steering system will now not perform. Fortunately, putting in a brand new power steering belt is a straightforward activity, and the belts are comparatively cheap.

Car’s Power Steering Belt Installation Instructions

Be certain that the engine is cool to keep away from severe burns from inadvertently touching the engine by permitting the engine no less than two hours to chill as soon as turned off.

Find the slots throughout the power steering pump’s brackets. Not all engines are designed the identical approach, however the majority of energy steering pumps connect to the engine taken from two brackets. These brackets function slots, by way of which a single bolt enters. These slots are particularly designed to permit the pump to be moved both in direction of or away from the engine to loosen or tighten the stress on the pump’s belt.

Loosen the bolts throughout the slats on the brackets with a wrench, then push the pump in direction of the engine. If the faulty belt has not but damaged away from the pump, merely pull the belt over the engine’s fan to take away it.

Install the substitute belt by sliding the belt across the engine’s pulleys. Engines usually have at the least two belt-pushed equipment, mostly the ability steering pump and the alternator. Engines may function belt-pushed equipment, resembling an air-con compressor or a smog pump. Every accent’s belt suits right into a groove that may be reduce into the accent’s pulley, in addition to a groove situated on the pulley on the front of the crankshaft. To put in the belt, merely slide one aspect of the belt into the groove on the crankshaft’s pulley, then slide the opposite finish of the belt across the power steering pump’s pulley.

Pull the ability steering pump away from the engine till the belt is tight. Tighten every of the bolts positioned throughout the slots on the pump’s brackets with a wrench, whereas concurrently pulling the pump away from the engine to keep up pressure on the belt till the bolts are tight.

[taken from ehow.com]


Viewing all articles
Browse latest Browse all 15

Latest Images

Trending Articles





Latest Images